Summer heat may be taxing on your compressed air system. When working in the humid, 90+ degree heat, you become tired and worn down, and your air compressor is no exception.
Your compressor runs at reduced flow rates in the heat, resulting in a lesser volume of air coming through the intake. As a result, your facility receives less compressed air. As the temperature of the cooling water rises, so does the temperature of the air. As the air temperature rises, there is more water in the air, requiring the compressor to work harder. Automatic drains amplify this impact, making your system work even harder.
In brief, summer temperatures put a strain on your air compressor system. However, there are things you may do to lighten your load.
How to ensure that your compressed air system survives the Summer Heat
Check the Fluid System
The engine’s fluid circulation system must be operational. This is crucial for avoiding more downtime later on.
Keep a Check on Oil at Regular Intervals
Keeping an oil change schedule might help you maintain the optimum engine viscosity. In addition, it contributes to ensuring that the compressed air system’s engine is powerful enough to eliminate moisture and pollutants for improved performance. The optimum time to check the oil is in the spring, just before the summer heat arrives.
Examine Your Electrical Cabinet
Dirt and dust can accumulate and cause your electrical components inside the compressed air system to overheat. Check that your fans are working smoothly, and clear any accumulated filters within your electrical cabinet. As you go through these stages, take all necessary safeguards.
Examine the Drive Couplings
To minimize future downtime, ensure that the drive couplings are in good condition. Couplings are built to last for a long period, yet they wear out.
Keep the Dryer Running
A refrigerated dryer works best with clean, cold air or water. It must be well-ventilated for this to happen. This isn’t the case if it’s blocked with dirt and trash. It’s also good to check the refrigerant level to minimize unplanned downtime.
Examine the dryers, tanks’, and filters’ system drains.
When your drains are in good operating order, they can remove all the compressed air and the compressed air system. So running it should be pretty simple to determine if your drain has a test button.
Check Your Compressed Air Equipment
Keeping your aftercooler clean is critical to ensuring that your equipment functions to manufacturer specifications. The temperature that rises regularly might reduce the capacity of your equipment.
Compressor Room Ventilation
The most important thing to remember during the maintenance of a compressed air system is to keep your system away from excessive heat. Ductwork can be used to remove excess exhaust from a room without causing harm to the equipment. If you already have to duct with thermostatic control, ensure it’s in good working order. Simply adding louvers or fans to the room can help keep the temperature down.
Replace Your Inlet Filter
It is vital to maintain the optimum operating temperature. As a result, less air passes through the inlet during the hot summer months.
You may increase your system’s compression efficiency and keep it stronger when you have a proper maintenance plan for changing the inlet filter.
Keep the Coolers clean.
In the summer heat, the coolers play an important role. They can perform at their best when kept free of dirt and debris. This will make the dryers more effective and improve the life of the fluids inside the system.
Conclusion
It’s critical not to avoid or delay the maintenance of your compressed air system, especially in hot weather. You can safeguard your compressed air system against unplanned downtime if you take the simple steps mentioned in this blog. If you have any queries or issues, please contact stopleakloss right away!