Water Leak Detection- Every ounce of pure water is valuable. Unfortunately, due to aging infrastructure, water is lost by 30–50%. For the water service provider, lost water equals lost money. Leaks and cracks in pipelines and fittings cause water to be lost. Because most infrastructure is underground, visual detection of leaks is nearly impossible unless the water has reached the surface (creating pounding and sinkholes, structural damage, collapsing pavement, and so on), and even then, the same site may be ambiguous. Pipeline leak detection necessitates advanced technology that allows inspectors to pinpoint the exact location and severity of breaches. This is a field that continues to develop and expand via the application of both established technologies and new methodologies.

Why is a Water Leak Detection System Required?

A water leak detecting system detects impending calamities. When the system detects water activity, it either turns off the water supply to the entire warehouse or closes the valve to the leaky pipe.

The utilization of modern technologies to locate the exact location and magnitude of pipeline leaks is required for leak detection. This field tries to progress and evolve by combining existing technologies and new ideas. With proper maintenance of aging water pipes, leaks can be easily found and repaired, resulting in fewer water interruptions and financial losses.

Once a year, a full-scale leak audit is conducted to obtain a complete picture of leaks over time. In addition, a thorough examination of the complete water distribution system is required.

• Pre-screening auditing efforts
• Controls and procedures for distribution are being tested.
• Information on the piping’s kind, age, and size
• System mapping
• Ensure the meter’s accuracy

Audit Methods for Water Leak Detection

A water leak with a loud(Acoustic) sound

Water leak detection in this manner is the most common. It entails “a methodical approach of surveying the distribution system, identifying leak sounds, and pinpointing the exact position of hidden subsurface leaks” with the use of listening equipment.

Water escapes from a pipe under high pressure and makes a distinct sound. A pipe may carry this sound a long way.

The sound can be conveyed at different pitches depending on the pipe’s type of material, length, and diameter. The sound gets louder as the acoustic equipment gets closer to the leak spot when used on a pipe. Heavy traffic, deep soil, and thick road surface might muffle the sound, a disadvantage of mobile acoustic water detection.

Detection of pressure leaks

This secondary water leak detection technology uses pressure differences to find a leak. When a  flow meter & pressure gauge are carefully placed, the difference in readings will aid in locating a leak fast. This is because water pressure drops when there is a leak. The pressure meter will pick up on this change. Water leaks can be located using primary and secondary water leak detection technologies.

Detecting a leak by Thermal Camera

To identify leaks in water systems, this technology uses thermal cameras. The boiler must be turned on before being inspected using this approach.

The floor’s surface temperature will rise as hot water travels through the pipe. The water going through the pipes will be visible thanks to a thermal camera that picks up the heat pattern on the floor. If there are no leaks, the camera will display a sharp image that distinguishes the hot pipes from the surrounding cold. The camera will show an irregularly shaped spot with a light center when there is a leak.

BOTTOMLINE

No matter how little they appear, water leaks can quickly turn into a disaster. They can cause property damage, water contamination, illness, expensive utility bills, and revenue loss.

Water leak detection and audits are important because they can help find concealed leaks and correct them immediately before serious harm occurs. Water Leak Detection Methods That Work include:

• Acoustic
• Thermal
• Pressure
• Digital
• X-ray
• Cable sensor

Do you think your water distribution system leaks? Do you want to be safe and have your water distribution system inspected for leaks? STOPLEAKLOSS is the company to call if you need help.

STOPLEAKLOSS provides a variety of leak detection methods and a thorough repair estimate if necessary. For the safety of your home & property, we have only experienced, licensed, and insured experts. We are also non-intrusive; we are the industry leader in non-destructive water leak detection, including hidden water and sewer leaks. Visit https://stopleakloss.com/contact-us/ or phone +91 8023141510-13 for more information about our services.